Zhuang Yu'er seemed to be unable to stand it, and her little hand slapped Wu Ming's bad hand and then slapped Wu Ming's bad hand hard.
My body hurriedly walked away from the competition field
Looking at his wife, her butt twisted away, Wu Ming smiled
Haha, when I go back, I will have fun playing with you. Wu Ming thought to himself
Wu Ming reached out and carried the tool bag on his body
Look at the seven machines I chose
Looking at these seven machines, Wu Ming cursed, he was going to fight you again
Wu Ming has already had a bored mentality about such a small Japanese machine.
In his previous life, he had been dealing with such Japanese small machines, but in this life, he was still fighting with such Japanese small machines.
Wu Ming cursed and threw the tool kit in his hand next to the first machine in front of him.
Lower his body and took out a kickstick from the open tool kit
Wu Ming took the kickstick and started to open the machine in front of him from the bottom.
Then, from the bottom of these machines, one remote control after another
It took less than a few minutes, and all the seven remote controls were taken out by Wu Ming from the bottom of these machines.
Wu Ming held these remote controls in his hand and began to control these Japanese small machines in front of him.
On the button of the remote control, Wu Ming kept pressing some numbers
When different numbers are pressed, a row of corresponding numbers will be displayed on the remote control.
What do these corresponding numbers mean? If you don’t know much about the mechanics of Japanese small machines, you won’t understand them at all.
These numbers correspond to the mechanics problem of this Japanese small machine, which is the corresponding body of the machine.
The remote control function that Wu Ming just started is a function to allow Japanese small machines to self-check internal problems.
The little Japanese stuff is really powerful in terms of function
This ability to self-check problems can almost detect more than 90% of your own problems
The problem on the circuit, the number displayed, the number in front of the opening is three
The mechanical problem, the number shown above is four
The overall adjustment problem, the number shown above is five
After the general problem is displayed, the representative number of where the problem is wrong will also be displayed behind the remote control screen.
Wu Ming could be said to be memorizing what kind of questions these numbers represent after them.
His previous life has been deeply imprinted in his mind, thousands of times, and in this life, such numbers are a little numb when I think about them.
I just feel like I fucked the old lady from Qianbian. How could she deal with her? Wu Ming doesn't need to guess, he knows it.
Looking at the two numbers displayed on the first remote control, Wu Ming looked at it and knew that there were two problems on the circuit of this machine.
Wu Ming looked at the two numbers like this and smiled slightly was a small problem.
Wu Ming took one or two similar tools
After opening one of the side casings of this machine, connect the wires inside slightly.
He solved the two problems displayed by this Japanese small machine
Of course, after getting it done, we need to start it first
Only when it is started will it mean that the machine has been repaired
Wu Ming tightened the disassembled part again
Press your finger directly on the start button of this Japanese small machine
Buzzing..., it started directly
After starting up, Wu Ming didn't even look at it, and walked towards the second Japanese small machine.
Looks very confident
Damn! One was repaired in two minutes. Looking at Wu Ming's performance from a distance, Xue Man looked at the watch in his hand with a surprised expression.
For an experienced mechanic like him, the Japanese small machine that is very difficult to repair is actually in Wu Ming's hands, like a simple building block toy
Just fiddling with it, it will be repaired
Xue Man looked at this situation and felt a little bit like this. Did he see his eyes wrong?
Wu Ming started a small Japanese machine, and Xue Man on the other side seemed to be showing signs of weakness.
It also quickly started a small Japanese machine there
The buzzing sound of the machine also made it out from him
Wu Ming's mood was not affected at all when he heard this voice.
Be calm and repaired another machine below
The machine was started
After repairing the machine, Wu Ming was still thinking that I was lucky. The problems I encountered were all circuit problems.
Either this wire is not connected, or that wire is not in contact with it, such a problem, just do it, what else do you need to repair it?
Wu Ming was still glad that he had good luck when he encountered the third machine he was looking at the digital code corresponding to the problem displayed by the remote control.
Looking at such a digital code, Wu Ming secretly cursed and changed the bearing of the secondary motor. I'll go, big project
Wu Ming thought about such a thing and didn't believe it, so he turned on the Japanese small machine, the case below the side, and looked at the secondary motor of the Japanese small machine installed there.
Looking at the motor, the oil kept oozing out. Looking at this situation, Wu Ming knew in his heart that his judgment just now was absolutely correct.
Damn... Wu Ming cursed and pulled the handle on the reserve part box of this Japanese small machine in front of him with one hand
Pull the box of the storage parts box open
These Japanese small machines in front of you all come with a spare parts box
In such a box, there are parts that need to be replaced frequently
The secondary motor bearings of Japanese small machines are also one of these parts that need to be replaced frequently
Wu Ming didn't find this bearing in the storage box of this Japanese small machine in front of him.
Seeing this situation, he is not in a hurry
Instead, the reserve parts box behind the two Japanese small machines next to it was opened.
Soon, Wu Ming found the bearing he needed in the reserve parts box of one of the Japanese small machines.
At this time, Wu Ming focused on replacing the bearing of the third Japanese small machine secondary motor.
He didn't notice that Xie Changlong in the distance was now looking at him with a surprised look.
It can completely use the remote control of this Japanese small machine and control the remote control, which allows it to find problems in its own body, and can accurately judge the numbers displayed after the Japanese small machine judges the problem, and what is the corresponding specific problem?
Jie Changlong was thinking about these things in his heart, and his face looked extremely confused.
I thought that no one in China could have such research on such Japanese small machines except me. I really didn’t expect that there would be such talents in such a remote place. How did he obtain knowledge about these Japanese small machines?
Xie Changlong doesn't seem to understand
Did you learn the original Japanese file? Jie Changlong thought of the possibility of a problem
But thinking about this, Xie Changlong hurriedly shook his head, indicating that it was impossible.
Even if you learn the original Japanese file, you can't learn so much knowledge. At most, you can learn one or two. The method of using a Japanese small machine remote control is definitely not like him. You have fully understood the essence of Japanese small machine repair.
Jie Changlong finally understood that today he met a real opponent
I went to Japan for three years and specialized in the repair technology of Japanese small machines. I thought it would be difficult to meet a mechanic who could compete with me for this type of repair technology within ten or twenty years. But I didn't expect that after just one year of studying abroad, I met such a person. This guy is really amazing and exciting.
It seems that Jie Changlong admires Wu Ming very much.
My body hurriedly walked away from the competition field
Looking at his wife, her butt twisted away, Wu Ming smiled
Haha, when I go back, I will have fun playing with you. Wu Ming thought to himself
Wu Ming reached out and carried the tool bag on his body
Look at the seven machines I chose
Looking at these seven machines, Wu Ming cursed, he was going to fight you again
Wu Ming has already had a bored mentality about such a small Japanese machine.
In his previous life, he had been dealing with such Japanese small machines, but in this life, he was still fighting with such Japanese small machines.
Wu Ming cursed and threw the tool kit in his hand next to the first machine in front of him.
Lower his body and took out a kickstick from the open tool kit
Wu Ming took the kickstick and started to open the machine in front of him from the bottom.
Then, from the bottom of these machines, one remote control after another
It took less than a few minutes, and all the seven remote controls were taken out by Wu Ming from the bottom of these machines.
Wu Ming held these remote controls in his hand and began to control these Japanese small machines in front of him.
On the button of the remote control, Wu Ming kept pressing some numbers
When different numbers are pressed, a row of corresponding numbers will be displayed on the remote control.
What do these corresponding numbers mean? If you don’t know much about the mechanics of Japanese small machines, you won’t understand them at all.
These numbers correspond to the mechanics problem of this Japanese small machine, which is the corresponding body of the machine.
The remote control function that Wu Ming just started is a function to allow Japanese small machines to self-check internal problems.
The little Japanese stuff is really powerful in terms of function
This ability to self-check problems can almost detect more than 90% of your own problems
The problem on the circuit, the number displayed, the number in front of the opening is three
The mechanical problem, the number shown above is four
The overall adjustment problem, the number shown above is five
After the general problem is displayed, the representative number of where the problem is wrong will also be displayed behind the remote control screen.
Wu Ming could be said to be memorizing what kind of questions these numbers represent after them.
His previous life has been deeply imprinted in his mind, thousands of times, and in this life, such numbers are a little numb when I think about them.
I just feel like I fucked the old lady from Qianbian. How could she deal with her? Wu Ming doesn't need to guess, he knows it.
Looking at the two numbers displayed on the first remote control, Wu Ming looked at it and knew that there were two problems on the circuit of this machine.
Wu Ming looked at the two numbers like this and smiled slightly was a small problem.
Wu Ming took one or two similar tools
After opening one of the side casings of this machine, connect the wires inside slightly.
He solved the two problems displayed by this Japanese small machine
Of course, after getting it done, we need to start it first
Only when it is started will it mean that the machine has been repaired
Wu Ming tightened the disassembled part again
Press your finger directly on the start button of this Japanese small machine
Buzzing..., it started directly
After starting up, Wu Ming didn't even look at it, and walked towards the second Japanese small machine.
Looks very confident
Damn! One was repaired in two minutes. Looking at Wu Ming's performance from a distance, Xue Man looked at the watch in his hand with a surprised expression.
For an experienced mechanic like him, the Japanese small machine that is very difficult to repair is actually in Wu Ming's hands, like a simple building block toy
Just fiddling with it, it will be repaired
Xue Man looked at this situation and felt a little bit like this. Did he see his eyes wrong?
Wu Ming started a small Japanese machine, and Xue Man on the other side seemed to be showing signs of weakness.
It also quickly started a small Japanese machine there
The buzzing sound of the machine also made it out from him
Wu Ming's mood was not affected at all when he heard this voice.
Be calm and repaired another machine below
The machine was started
After repairing the machine, Wu Ming was still thinking that I was lucky. The problems I encountered were all circuit problems.
Either this wire is not connected, or that wire is not in contact with it, such a problem, just do it, what else do you need to repair it?
Wu Ming was still glad that he had good luck when he encountered the third machine he was looking at the digital code corresponding to the problem displayed by the remote control.
Looking at such a digital code, Wu Ming secretly cursed and changed the bearing of the secondary motor. I'll go, big project
Wu Ming thought about such a thing and didn't believe it, so he turned on the Japanese small machine, the case below the side, and looked at the secondary motor of the Japanese small machine installed there.
Looking at the motor, the oil kept oozing out. Looking at this situation, Wu Ming knew in his heart that his judgment just now was absolutely correct.
Damn... Wu Ming cursed and pulled the handle on the reserve part box of this Japanese small machine in front of him with one hand
Pull the box of the storage parts box open
These Japanese small machines in front of you all come with a spare parts box
In such a box, there are parts that need to be replaced frequently
The secondary motor bearings of Japanese small machines are also one of these parts that need to be replaced frequently
Wu Ming didn't find this bearing in the storage box of this Japanese small machine in front of him.
Seeing this situation, he is not in a hurry
Instead, the reserve parts box behind the two Japanese small machines next to it was opened.
Soon, Wu Ming found the bearing he needed in the reserve parts box of one of the Japanese small machines.
At this time, Wu Ming focused on replacing the bearing of the third Japanese small machine secondary motor.
He didn't notice that Xie Changlong in the distance was now looking at him with a surprised look.
It can completely use the remote control of this Japanese small machine and control the remote control, which allows it to find problems in its own body, and can accurately judge the numbers displayed after the Japanese small machine judges the problem, and what is the corresponding specific problem?
Jie Changlong was thinking about these things in his heart, and his face looked extremely confused.
I thought that no one in China could have such research on such Japanese small machines except me. I really didn’t expect that there would be such talents in such a remote place. How did he obtain knowledge about these Japanese small machines?
Xie Changlong doesn't seem to understand
Did you learn the original Japanese file? Jie Changlong thought of the possibility of a problem
But thinking about this, Xie Changlong hurriedly shook his head, indicating that it was impossible.
Even if you learn the original Japanese file, you can't learn so much knowledge. At most, you can learn one or two. The method of using a Japanese small machine remote control is definitely not like him. You have fully understood the essence of Japanese small machine repair.
Jie Changlong finally understood that today he met a real opponent
I went to Japan for three years and specialized in the repair technology of Japanese small machines. I thought it would be difficult to meet a mechanic who could compete with me for this type of repair technology within ten or twenty years. But I didn't expect that after just one year of studying abroad, I met such a person. This guy is really amazing and exciting.
It seems that Jie Changlong admires Wu Ming very much.
![[Incestuous Novels] My wife's two cousins - Harem, hunting for beauty, cool writing](/templates/nvshen/themes/img/thumb_1.png)